Sanyo FW50C85T Owner's Manual page 18

8
Use H I to Select your preferred picture setting, then press OK.
Please select your preferred picture mode.
The energy consumption in the "Standard"
setting is Energy Star certified.
Cancel
9
After Picture setup is completed, A message will appear if there is
the latest software on the network server.
Note(s)
If you are not receiving a signal from your Cable service, contact the Cable provider.
●
If you press B during autoprogram, this setup of TV channels will be cancelled.
●
The Initial Autoprogram function can be executed for either Antenna or Cable only once.
●
When you change the connection (Antenna / Cable), select Search for channels again. L
p. 35
After an Initial Setup is completed...
●
Standard
●
Vivid
Sports
●
●
●
●
●
If you want to scan the channels Automatically again.
Search for channels L p. 35
You can add the desired channels not memorized by Autoprogram
through antenna connection.
Weak channel installation L p. 35
If you want to change to another Language.
Language L p. 33
If you want to change the country setting.
Country L p. 48
If you want to change the Location setting.
Location L p. 33
If you want to change the network setting.
Connect to network L p. 38
If you want to restore the picture and sound setting.
Picture setup L p. 28
18 .
English