Does Not Print Correctly - Oki T400 Setup Manual

Does not print correctly

Print error
• Paper set correctly?
➞
• Platen roller clean?
➞
(refer to the manual).
• Paper replenished regularly?
➞
be fed to the printer correctly. Please be sure to use paper.
• Is the data or signal from the computer is correct?
➞
contents and communication conditions of the software in your
computer.
• Setting of paper position correction adjusted?
➞
• Label adhered the sensor?
➞
• Sensor clean?
➞
Paper is fed but does not print
• Thermal head clean? No label is adhered to the head?
➞
Kit.
➞
Please make sure not to remove the label using metal instruments such
as a screw driver. It may damage the thermal head.
➞
it using the Cleaning Kit.
Printout is not clear
• Print darkness appropriate?
➞
➞
the manual) by changing the printer darkness settings in the Printer
Setting screen. When you use the Print Darkness Adjustment Volume, be
sure to read the manual.
Please set the paper correctly.
If the platen roller is not clean, clean it using the Cleaning Kit
If the edge of the paper does not set regularly, the paper cannot
Please turn off and on the power of the printer. Confirm the
Please correct the position. See the manual for details.
Remove the label and clean up.
Clean the sensor.
If the thermal head is not clean, clean the head using the Cleaning
If a label is adhered to the thermal head, remove the label.
If the stick from the label is adhered to the thermal head, clean
You can adjust the print darkness (refer to the manual).
You can adjust the Print Darkness Adjustment Volume (refer to
13