End Of Paper Feed - Canon imageprograf ipf755 User Manual

Hide thumbs Also See for imageprograf ipf755:
Table of Contents

Advertisement

Cause
You are using paper that is
not compatible with auto-
matic cutting.
In other cases, the Cutter
Unit may be damaged.

End of paper feed.

You are pressing the ▲ button on the Control Panel and trying to rewind the roll to the edge.
Rel lever is in wrong position.
Cause
The Release Lever is pushed back.
Borderless printng not possible.
Cause
The print job received specifies
a type or width of paper that is
not compatible with borderless
printing.
The loaded paper is a size not
compatible with borderless
printing.
iPF755
Downloaded from ManualsPrinter.com Manuals
For information about paper that is compatible with automatic cutting, see the Paper
Reference Guide.
(See Paper Reference Guide .)
2. Push the Release Lever back and remove the paper.
Contact your Canon dealer for assistance.
Cause
Corrective Action
Pull the Release Lever forward.
Turn off the printer and wait a while before restoring power.
Follow these steps to change the settings of the print job to enable borderless print-
ing.
1. Press ▲ or ▼ to select Stop Printing, and then press the OK button.
2. Make sure the correct printer driver for the printer is selected and try printing
again.
For information on types of paper compatible with borderless printing, refer to
the Paper Reference Guide.
(See Paper Reference Guide .)
Select None when you have set Detect Mismatch on the control panel to Warning.
However, note that this error may cause paper jams and affect the printing quality.
Press ▲ or ▼ to select Print With Border, and then press the OK button to con-
tinue printing. The document will be printed with a border.
Press ▲ or ▼ to select Stop Printing, and then press the OK button.
Replace the paper with paper compatible for borderless printing as follows.
1. Press ▲ or ▼ to select Change Paper, and then press the OK button.
(See "Removing the Roll from the Printer.")
(See "Removing the Roll Holder from Rolls.")
2. Replace the paper with paper compatible for borderless printing.
(See "Attaching the Roll Holder to Rolls.")
(See "Loading Rolls in the Printer.")
The printer now starts printing the print job.
For information on types of paper compatible with borderless printing, refer to
the Paper Reference Guide.
Error Message
Corrective Action
Release the ▲ button.
Corrective Action
→P.643
→P.647
→P.633
→P.637
>
Messages regarding paper
>
Corrective Action
End of paper feed.
13
887

Advertisement

Table of Contents
loading

Table of Contents