Ricoh AFICIO MP C2500 Settings Manual page 34

Connecting the Machine
IEEE 802.11b (wireless LAN)
This section lists the settings required for sending file with IEEE 802.11b (wire-
less LAN).
1
For details about how to specify the settings, see "Interface Settings" and "File
Transfer".
Menu
Interface Settings/Network Machine IPv4 Address
Interface Settings/Network IPv4 Gateway Address
Interface Settings/Network DNS Configuration
Interface Settings/Network DDNS Configuration
Interface Settings/Network Domain Name
Interface Settings/Network WINS Configuration
Interface Settings/Network Effective Protocol
Interface Settings/Network LAN Type
Interface Settings/Network Permit SNMPv3 Communication
Interface Settings/Network Permit SSL/TLS Communication
Interface Settings/Network Host Name
Interface Settings/IEEE 802.11b Communication Mode
Interface Settings/IEEE 802.11b SSID Setting
Interface Settings/IEEE 802.11b Channel
Interface Settings/IEEE 802.11b Security Method
Interface Settings/IEEE 802.11b Transmission Speed
File Transfer
File Transfer
Note
❒ In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒ [IEEE 802.11b] and [LAN Type] are displayed when the wireless LAN interface
board is installed. If both ethernet and wireless LAN (IEEE 802.11b) are con-
nected, the selected interface takes precedence.
Reference
p.56 "Interface Settings"
p.66 "File Transfer"
26
Downloaded From ManualsPrinter.com Manuals
User Tool
Scanner Resend Interval Time
Number of Scanner Resends
Setting Requirements
Neccessary
Neccessary
As required
As required
As required
As required
Neccessary
Neccessary
As required
As required
As required
Neccessary
As required
As required
As required
As required
As required
As required