Oki ML1120 User Manual page 33

13. Put the arms over the pivot points (1) .
1120_bottomfeed_19.jpg
14. Rotate the unit back until the clamps close over the back pins.
15. Turn the platen knob. If the tractor assembly is correctly installed, the
gear (1) will turn. If the gear does not turn as you turn the platen knob,
repeat steps 12 through 14.
1120_bottomfeed_20.jpg
16. Install the rear cover. Position the pins (1) in the guides. Gently rotate
the cover until the collars (2) lock over the posts.
1
Microline 1120 User's Guide
1120_bottomfeed_18.jpg
1
33
1