Rear Feed
Nota
The default setting is in
Item
Line Spacing
Form Tear-off
Skip Over Perf.
Page Length
Cut position adjust
bold blue italic
Settings
6 LPI
8 LPI
Manual
0.5 sec
1.0 sec
2.0 sec
Note: The Form Tear Off feature allows you to advance
continuous forms to the stacker for tear off.
When Form Tear-off is activated (on), the paper will
advance to the tear bar position AFTER the printer
has been idle for the selected interval (0.5, 1, or 2
seconds).
When more data is received and processed by the
printer, the paper automatically returns to the original
printing position.
No
25.4 mm (1")
279.4 mm (11")
296.3 mm (11.67")
304.8 mm (12")
355.6 mm (14")
431.8 mm (17")
127.0 mm (5")
76.2 mm (3")
82.6 mm (3.25")
84.7 mm (3.33")
88.9 mm (3.5")
93.1 mm (3.67")
101.6 mm (4")
139.7 mm (5.5")
152.4 mm (6")
177.8 mm (7")
203.2 mm (8")
215.9 mm (8.5")
- 20 ~ - 1
0
+ 1 ~ +20
Microline 1120 User's Guide
type.
15