Creating Jpeg Copies Of Raw Pictures - FujiFilm FINEPIXX100 Owner's Manual

Creating JPEG Copies of RAW Pictures

Creating JPEG Copies of RAW Pictures
RAW pictures store information on camera settings separately from the data captured by the camera
image sensor. Using the j RAW CONVERSION option in the playback menu, you can create JPEG
copies of RAW pictures using diff erent options for the settings listed below. The original image data are
unaff ected, allowing a single RAW image to be processed in a multitude of diff erent ways.
1 Press MENU/OK during playback to display the
playback menu, then press the command dial
up or down to highlight j RAW CONVER-
SION and press MENU/OK to display the set-
tings listed in the table at right.
2 Press the command dial up
or down to highlight a set-
ting and press the dial right
to select. Press the dial up
or down to highlight the
desired option and press MENU/OK to select
and return to the settings list. Repeat this step
to adjust additional settings.
3 Press the RAW button to
preview the JPEG copy.
Press MENU/OK to save the
copy or press DISP/BACK to
return to Step 2.
Setting Setting
REFLECT
SHOOTING COND.
PUSH/PULL
PROCESSING
DYNAMIC RANGE
RAW CONVERSION
REFLECT SHOOTING COND.
FILM SIMULATION
PUSH/PULL PROCESSING
DYNAMIC RANGE
FILM SIMULATION
WHITE BALANCE Adjust white balance (
WHITE BALANCE
WB SHIFT
WB SHIFT
CREATE CANCEL
COLOR
SHARPNESS
NOISE REDUCTION Process the copy to reduce mottling (
HIGHLIGHT TONE Adjust highlights (
SHADOW TONE
COLOR SPACE
SET CANCEL
Description Description
Create a JPEG copy using the settings in ef-
fect at the time the photo was taken.
Adjust exposure by –1 EV to +3 EV in incre-
P
ments of  /  EV ( 29).
Enhance details in highlights for natural con-
P
trast ( 69).
Simulate the eff ects of diff erent types of fi lm
P
( 53).
P
34).
P
Fine-tune white balance (
P
Adjust color density ( 69).
P
Sharpen or soften outlines (
P
70).
P
Adjust shadows ( 70).
Choose the color space used for color repro-
P
duction ( 85).
69).
70).
P
70).
67