Step 6: Run Ekm Path Diagnostics; Step 7: Configure Partitions For Library Managed Encryption - Quantum scalar i40 User Manual

Hide thumbs Also See for scalar i40:
Table of Contents

Advertisement

Step 5: Install TLS
Communication
Certificates on the
Library
Step 6: Run EKM Path
Diagnostics
Step 7: Configure
Partitions for Library
Managed Encryption
Quantum Scalar i40 and Scalar i80 User's Guide
7
In the Port text boxes, type the port numbers corresponding to
Port:
the listed servers. The port number listed in the text box must match
the port number on the server.
Note: For SKM the port number is always 6000. You cannot
change SKM port numbers.
For KMIP Key Manager the port number must match the
configured port number on the KMIP key manager server. A
typical port number used for communication between the
KMIP key manager server and the library is port 5696.
8 Click
.
Apply
9 Ensure all ports corresponding to the EKM servers are open on your
firewall to allow the library to connect to the servers. For SKM, ports
80, 6000, and 6001 must be open.
Depending on when your library was manufactured, TLS certificates may
already be installed. If they are not installed, you must install them. See
Checking and Installing TLS Certificates
how to verify whether they are installed, and how to install them.
Run the Manual EKM Path Diagnostics to be sure the library is
connected properly to both SKM servers. See
Diagnostics
on page 187 for instructions.
Encryption on the library is enabled by partition only. You cannot select
individual tape drives for encryption; you must select an entire partition
to be encrypted.
Data written to encryption-supported and encryption-capable media in
EKM-supported tape drives will be encrypted unless data was previously
written to the media in a non-encrypted format. For data to be
encrypted, the media must be blank or have been written to using
Library Managed Encryption at the first write operation at the beginning
of tape (BOT).
Chapter 7: Encryption Key Management
Configuring Scalar Key Manager (SKM) on the Library
on page 198 for instructions on
Running Manual EKM Path
183

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Scalar i80

Table of Contents