When installing:
• Before you attach the thermal fan assembly to the computer, apply thermal grease, at an amount of 0.2
grams. Either too much or too less application of grease can cause a thermal problem due to imperfect
contact with a component. For the new thermal fan assembly, you must peel the thin film off from
the rubbers.
• Ensure that the connector of the thermal fan is attached firmly.
1100 Keyboard
For access, remove these FRUs:
•
"1010 External battery pack" on page 60
•
"1020 Big door" on page 61
Before removing the keyboard, find the keyboard multi-tool in the shipping package of the new keyboard.
2b
2c
2d
2a
1
.
Chapter 9
Removing or replacing a FRU
69