Table of Contents
Advertisement
Removal steps of the wireless WAN card
Step
Screw (quantity)
2
M2 × 3 mm, flat-head, nylon-coated (1)
When installing:
Plug the orange cable into the main connector on the card; and plug the blue cable into the auxiliary
connector on the card.
1100 Keyboard bezel assembly
For access, remove these FRUs:
•
"1010 Battery" on page 65
•
"1020 Bottom cover" on page 66
•
"1030 Storage drive" on page 66
•
"1060 Keyboard" on page 72
Important:
Read the following instructions first before replacing the keyboard bezel assembly for the computer models
with a color sensor.
• If the hard disk drive or solid-state drive is not defective, and only the keyboard bezel assembly needs a
replacement:
1. Replace the keyboard bezel assembly.
2. After you replace the keyboard bezel assembly, start the computer and run the Sensor Replacement Utility
program by clicking Start ➙ All Programs ➙ X-Rite ➙ Sensor Replacement Utility.
3. If you do not have access to the hard disk drive or solid-state drive, provide the customer with information on
how to run the Sensor Replacement Utility.
Color
Torque
Black
0.181 Nm
(1.85 kgf-cm)
.
Chapter 9
Removing or replacing a FRU
79
Advertisement
Table of Contents
