Adjustment Of The Height Of The Work Clamp Foot; Adjustment Of The Thread Trimmer Sensor - JUKI LK-1900AN Engineer's Manual

(14) Adjustment of the height of the work clamp foot

(15) Adjustment of the thread trimmer sensor

After the completion of origin retrieval in the test mode CP-6 (Start Switch ON), try to press the + key 4 6
to 8 times. At that time, the thread trimmer sensor is turned ON. (The display 1 at the operation panel [10]
→ [00] )
Standard adjustment
Max. 17 mm
Standard adjustment
– 22 –