Printer Driver; Macintosh Usb Connection; Macintosh Network Connection; Duplex Unit - Oki C9000 Series Setup Manual

(b) When HDD INITIALISE is displayed, press
Select (3) button.
(c) Press Item (1) button to shutdown the
printer. The printer has to be switched off
and back on again to initialise the hard disk
before use.

Printer driver

Macintosh USB connection

1. Drag the printer icon from the desktop into the
waste bin and empty the waste bin.
2. Create a new desktop printer and the settings will
be updated automatically.

Macintosh network connection

1. Open [Chooser], click on [Adobe PS] and select
the printer.
2. Click on [Setup] - [Configure].
3. Select [Hard disk] from [Installable options] and
then select [Installed] from the drop down list.
4. Click on [OK] button twice and close [Chooser]
to complete the re-configuration of the printer
driver.
Chapter 3 - Macintosh Setup

Duplex unit

If your printer includes the duplex unit, please use the
following procedure to make sure that duplex printing
has been enabled in the printer and printer driver.

Printer

1. Press Menu (0) button until PRINT MENU is
displayed, then press Select (3) button.
2. Press Item (1) button until DUPLEX is
displayed.
3. Press Value (2) button until ON is displayed and
press Select (3) button. An asterisk (*) appears to
show that duplex has been set to on.
4. Press Online (4) button to turn the printer back
on line.
Printer driver
Macintosh USB connection
1. Drag the printer icon from the desktop into the
waste bin and empty the waste bin.
2. Create a new desktop printer and the settings will
be updated automatically.
English
49