Oki C6100 Series User Manual page 300

Macintosh OS 10.1, 10.2, and 10.3
For more information, see "General Information" on page
296.
1. Open the file you want to print.
2. Click File → Print.
3. In Output Options, select Save as File.
4. In Formats, select PostScript.
5. In the PostScript Settings panel, make your choices for
this print job.
Type: specify the PostScript type.
PostScript Level: this must match the PostScript level of
your printer.
Format: select ASCII or Binary. If you select Binary,
make sure that binary data transfer is supported.
Font Data: specify downloading fonts to the file. If you
are only using PostScript fonts, select None.
6. Click Save.
7. At Save as a new name, enter the desired filename.
8. Specify where you want the file saved (location).
9. Click Save.
C6100 Series User's Guide
300