Print Menu - Oki C6100 Series User Manual

Print Menu

Notes:
Factory default settings are shown in bold.
Settings with a dagger (†) only appear when the
appropriate option is installed.
Item Settings
COPIES 1 to 999
†
ON
DUPLEX
OFF
PAPER FEED TRAY1
TRAY2†
MP TRAY
AUTO TRAY ON
SWITCH OFF
TRAY DOWN
SEQUENCE UP
PAPER FEED TRAY
MP TRAY DO NOT USE
USAGE WHEN MISMATCHXXX
MEDIA ENABLE
CHECK DISABLE
MONO- AUTO SPEED
PRINT COLOR SPEED
SPEED
Explanation
Enter the number of copies of a
document to be printed.
Enables or disables duplex printing.
Selects the default tray for paper feed.
If two trays contain identical print
media, the printer can switch to an
alternate tray when the current tray
runs out in the middle of a print job.
Sets the sequence in which the printer
will seek an alternate tray with the
same media size should the currently
selected tray run out of media while
printing a job.
If a document to be printed demands a
paper size not installed in the selected
tray, the printer can automatically feed
from the Multi-Purpose Tray instead. If
this function is not enabled, the printer
will stop and request that the correct
size be loaded.
Set to DISABLE if you do not wish the
printer to check to see if the size paper
loaded in the selected tray matches that
required for the document being
printed.
Sets the print engine speed.
If you are printing only color
documents, switch to COLOR SPEED.
AUTO SPEED sets the speed of printing
based on whether the first page is color
or monochrome.
C6100 Series User's Guide
101
†