System Adjust Menu - Oki C5650dn User Manual

System Adjust Menu

This item appears if enabled by a System Administrator.
Notes:
• Factory default settings are shown in bold.
Item
X ADJUST
Y ADJUST
DUPLEX X ADJUST
DUPLEX Y ADJUST
DRUM CLEANING
Lists of Available Settings by Menu • 96
Settings
-2.00MILLIMETER TO
+2.00MILLIMETER
Default = 0.00
-2.00MILLIMETER TO
+2.00MILLIMETER
Default = 0.00
-2.00MILLIMETER TO
+2.00MILLIMETER
Default = 0.00
-2.00MILLIMETER TO
+2.00MILLIMETER
Default = 0.00
OFF
ON
C5650n/C5650dn User's Guide
Explanation
Adjusts overall print position
horizontally in 0.25
increments.
Adjusts overall print position
vertically in 0.25 increments.
Adjusts overall print position
of print face horizontally in
0.25 increments.
Adjusts overall print position
of print face vertically in 0.25
increments.
If you are experiencing
horizontal white lines on your
printed pages, enter the
menu and temporarily
change this setting to ON,
then send a one page print
job. This will cause an extra
blank sheet to print, cleaning
the drum prior to printing.
Careful! Leaving this set to
ON will reduce the image
drum life.