Philips series S5000 Manual page 25

1
2
5 Clean the cutter and guard under the tap.
6 After cleaning, place the cutter back into
the guard.
7 Put the shaving heads back into the shaving
head holder.
Note: Make sure the projections of the shaving heads
fit exactly into the recesses of the shaving-head holder.
8 Place the retaining rings back onto the shaving
head holder and turn them clockwise.
- Each retaining ring has two recesses and two
projections that fit exactly in the projections and
recesses of the shaving head holder.
ENGLISH
25