1
Press down the top cap to be able to place
the shaver in the holder ('click').
2
Hold the shaver upside down above the holder.
Make sure the front of the shaver points
towards the SmartClean system.
3
Place the shaver in the holder, tilt the shaver
backwards and press down the top cap to
connect the shaver ('click').
- The battery symbol flashes slowly to indicate
that the shaver is charging.
4
Press the on/off button on the SmartClean
system to start the cleaning program.
- During the cleaning program (which takes
approx. 10 minutes), the cleaning symbol flashes.
- When the cleaning program has been completed,
the ready symbol lights up continuously.
- The battery symbol lights up continuously to
indicate that the shaver is fully charged. This takes
approx. 1 hour.
Note: If you press the on/off button of the SmartClean
system during the cleaning program, the program aborts.
In this case, the cleaning symbol stops flashing.
ENGLISH
21