Note:
Factory default settings are shown in
Item
FONT
SOURCE
FONT NO.
FONT PITCH
PCL Emulation Menu
Settings
RESIDENT / DIMM0 /
DIMM1 / DOWNLOADED
I000 / C001 / S001
0.44 to 99.99 CPI
Default = 10.00 CPI
Menu Functions • 48
.
bold
Explanation
Specifies the location of the
PCL default font. Change
the setting appropriately if
additional fonts are installed
in the expansion ROM slot
or additional fonts have
been downloaded to the
printer as permanent fonts.
Sets the current default font
number from the currently
selected source:
I = internal (resident font);
I000 = Courier.
C = Font stored in the
printer's Flash memory.
S = downloaded soft font,
stored on the printer's
internal hard disk drive.
Applies only to printers with
the optional hard disk drive
installed.
Sets the character width of
the default font in characters
per inch (CPI). This is only
available when the selected
font is fixed width and
scalable.