Once someone has set up all the necessary overlay files on the
printer, other users only have to switch on the required settings in
the printer driver to use the overlays.
• The internal hard disk must be installed in the
printer to allow for spooling of the print job before
final printing.
• If the hard disk memory is insufficient for the
spooled data,
copy printed.
• If the software application being used has a collate
print option, this must be turned OFF for overlay to
operate correctly.
• An overlay may consist of more than one
component files.
Creating Documents To Use As Overlays
An overlay can be created in any software application that can
handle logos, letterheads, forms, etc. and can print to a file.
With the file to be stored as an overlay open in your application
1.
program, choose
Ensure that the
2.
application's Print dialog box.
Depending on the application, you may need to select your
3.
printer model, and then click
printer driver settings.
Windows: Postscript Emulation Driver • 266
NOTE
is displayed and only one
DISK FULL
then
File
Print
option is switched on in your
Print To File
Properties...
.
This should open the