Oki C5400 User Manual page 314

Overlay elements must be created in the software application
•
of your choice, then stored on the printer's hard drive using
Storage Device Manager before they can be used.
If the hard disk memory is insufficient for the spooled data, the
•
message DISK FULL appears.
If the software application has a collate print option, it must be
•
turned OFF before you print overlays.
Overlay printing cannot be done using the Windows 2000
•
PostScript driver or the Macintosh driver.
Using Overlays: Windows 2000 and XP PCL
In Windows 2000, overlays can only be printed using the PCL driver.
Defining Overlays: 2000 PCL
→
Click
1. Start
Right click the PCL printer icon, then click
2.
The Printing Preferences dialog box appears.
Click the
3. Overlay
Click
4. Define Overlays
Under
5. Overlay Name
Under ID Value, enter the ID number for the file saved using the
6.
Storage Device Manager software (see the File List printout).
In the
7. Print on Pages
overlay is to be printed, or select
numbers under
Click , then click
8. Add
The overlay you defined appears in the Defined overlays list.
Click and close the Printers dialog box.
9. OK
Printing Using Overlays: 2000 PCL
Open the document in the software application.
1.
→
Click
2. File
The Print dialog box appears.
Click the
3. Overlay
→
Settings Printers
tab.
.
, enter a name for the overlay.
drop-down list, select on which pages the
Custom pages.
Close
.
Print
tab.
Windows: Software Utilities • 312
.
Custom
.
Printing Preferences
and enter specific page
.