MANUAL TIMEOUT
WAIT TIMEOUT
LOW TONER
JAM RECOVERY
ERROR REPORT
LANGUAGE
POWER SAVE DELAY TIME
Sets the interval before the printer automatically enters the power save mode. Power Save can
also be disabled.
PERSONALITY
Sets the printer emulation.
CONTROL-T
®
PostScript
mode only.
Normally the printer is set to send a reply to CONTROL-T from the parallel port immediately. To
prevent this, change the setting to DISABLE.
CLEARABLE WARNING
®
PCL
emulation only.
Change the setting to JOB if you wish error messages which appear on the display to remain
there until the next print job comes in.
AUTO CONTINUE
PCL emulation only.
Determines whether or not the printer will automatically recover after a memory overflow or print
overrun.
MANUAL TIMEOUT
PostScript mode only.
60
SEC, 30 SEC, OFF
OFF, 5 to 300 SEC in increments of 1 SEC. Default =
CONTINUE, STOP
ON, OFF
ON,
OFF
ENGLISH, GERMAN, FRENCH, ITALIAN, SPANISH, SWEDISH,
NORWEGIAN, DANISH, DUTCH, TURKISH, PORTUGUESE
40
SEC.
137