Problem Solving: Windows Systems - Oki C 9400 User Manual

There is a Hand icon on the desktop printer.
► Select Start printer queue in the Printer menu.
Configuration procedure was not correctly followed or cancelled.
► Configure again from the beginning.
Memory error occurs.
Desktop print monitor or print monitor memory is insufficient.
► Increase memory size.
Printing is slow.
Print processing is carried out by the computer.
► Use a computer with faster print processing.
► Set lower print resolution in the printer driver.
Data is too complex.
► Simplify data.

Problem Solving: Windows Systems

Cannot configure for parallel connection.
The computer does not support bi-directional parallel interface.
► Use a computer that does.
Parallel cable does not meet specifications.
► Use IEEE-1284 compatible, bi-directional parallel cable.
Interface is disabled.
► Check that parallel interface is set to enable in the printer menu.
Configuration procedure was not correctly followed or was cancelled.
► Configure again from the beginning.
Parallel cable is disconnected or faulty.
► Check the connections; if okay, try another cable.
A converter, buffer or extension cable is being used.
► Connect the printer directly to the computer.
Cannot configure for USB connection.
Windows NT4.0 does not support USB.
► Use parallel connection instead.
Windows 95 or 3.1 systems which have been upgraded to Windows 98 are not guaranteed to
work with USB.
► Use parallel connection instead.
Computer does not support USB interface.
► Check if there is USB controller in device manager. If not, use parallel connection instead.
302