RARP
Specifies whether or not RARP automatically resets.
IP ADDRESS
Sets IP address (see Changing the IP address).
SUBNET MASK
Sets subnet mask (see Changing the Subnet Mask).
GATEWAY ADDRESS
Sets gateway address (see Changing the Gateway Address).
INITIALIZE
Change the setting to ON if you wish the network to initialize whenever the menu is exited.
PRINT SETTINGS
Change the setting to ON if you wish to print a MenuMap including the results of a self-
diagnosis and a listing of the network settings. The MenuMap will print automatically when you
exit the menu mode.
Parallel Menu
Sets parameters for the parallel interface.
Defaults are
red bold
Item (see descriptions below)
PARALLEL
BI-DIRECTION
ECP
ACK WIDTH
ACK/BUSY TIMING
I-PRIME
126
print.
Values
ENABLE, DISABLE
ENABLE, DISABLE
ENABLE, DISABLE
NARROW, MEDIUM, WIDE
ACK IN
BUSY, ACK WHILE BUSY
3 MICRO SEC, 50 MICRO SEC,
DISABLE