TEFAL Clipso User Manual page 17

Using your pressure
cooker for the first time
Downloaded from www.Manualslib.com
Fill the pressure cooker up to 2/3 full with water.
Close the lid on the pressure cooker.
Turn the selector so that it is on
Put the pressure cooker on the heat source at the highest
temperature.
!
Turn the pressure cooker so that the unlocking button is
facing you.
For Clipso Control pressure cooker, set the timer for 15 minutes
(see chapter on Smart Timer). The pressure indicator moves up after a
few minutes. For Clipso Control and Clipso Vitamin (model with air
release system), air and steam release can be heard for a short period
of time (see chapter on Air Release System).
When steam starts to release from the outlet, lower the heat source
and time for 15 minutes.
For all models
After 15 minutes, turn off the heat.
Gradually position the programme selector to
When no more steam escapes from the steam outlet and the
pressure indicator is down, open the pressure cooker.
For Clipso Control, make sure you now remove the timer from its
holder.
Rinse out the pressure cooker under water and dry it.
Clean the basket with warm water and washing up liquid.
Note: the appearance of marks/stains on the interior base of the
pressure cooker does not alter the quality of the metal. It is merely
due to calcium deposits. To remove these, use a scouring pad and
some diluted vinegar.
manuals search engine
.
.
15
7