Adjusting The Hot Milk Length - Saeco INCANTO EXECUTIVE HD9712 User Manual

ENGLISH
46
HOT MILK
Note:
Milk dispensing can be increased by pressing the "
amount of hot milk dispensed has no froth.
8
Remove the cup and close the milk dispensing spout by turning it
counter clockwise.
9
Wait for a few seconds. The carafe starts the automatic cleaning cycle
(see the "Cleaning and Maintenance" chapter).
10
Wait until the end of the cleaning cycle, remove the milk carafe and
place it in the refrigerator.

Adjusting the Hot Milk Length

Each time the " " button is pressed, the machine dispenses a pre-
set quantity of hot milk into the cup.
The machine allows you to adjust the amount of hot milk according to your
taste and the size of your cups.
1
Fill the carafe with milk and place it into the machine.
2 Place a cup under the dispensing spout and open the carafe dispens-
ing spout by rotating it clockwise.
3 Press and hold the "
Then release the button. The machine is now in programming mode.
" button. The extra
" button until the " " icon is displayed.