Oki B4400 User Manual page 54

Troubleshooting Setup Failure via USB
Symptom
Cannot setup in Windows 95/NT.40
Windows Me/98 upgraded from
Windows 95/3.1 is used.
The computer does not support
USB interface.
Interface is set to DISABLE.
The USB cable is disconnected.
A USB hub is used.
B4400/4500/4550/4600 User's Guide
Resolution
USB connection is available for
Windows Me/98/2000/XP/Server
2003 only.
No guarantee of proper operation.
Use a computer with a clean
installation of Windows Me/98.
Confirm that USB controller is
shown in the device manager.
B4500/4550/4600: Set to ENABLE
in the printer menu. See "USB
menu" on page 41.
B4400: Open the Status Monitor.
On the Printer Setup Tab, click the
Open Configuration button. Click
USB Menu, USB Enable.
Connect the USB cable.
Connect the printer directly to the
computer.
54