Priority Status And Request Reply Of A New Text Message - Motorola APX 2000 User Manual

5 or
and press the Menu Select button directly below
Sel to select the required message.
The message appears on the Compose screen,
with a blinking cursor at the end of it. Use the
keypad to edit the message, if required.
6 Press the Menu Select button directly below
Optn.
7 or
Select button directly below Sel.
8 Perform one of the following actions:
• or
highlight the required address.
•
or
Menu Select button below Edit. When a
blinking cursor appears on the Enter Address
screen, use the keypad to type the address
entry.
9 Press the Menu Select button directly below Send
or press the PTT button to send the message.
The display shows the Send Message screen and
108
Sending msg.
English
to scroll through the list of messages
to Send Message and press the Menu
to scroll through the address list and
to [Other Recpnt] and press the
If the message is sent, you hear a tone and the
display shows Msg sent.
If the message is not sent, you hear a low tone,
the display shows Send failed and returns to the
main TMS screen.
Note: You can append a priority status and/or a
request reply to your message. See
and Request Reply of a New Text Message
page 108 for more information.
Priority Status and Request Reply of a New Text
Message
Before sending your message, you can append a
priority status and/or a request reply to your
message.
Appending a Priority Status to a Text Message
Ensure that an outgoing message is composed to
allow you to perform this procedure. See
and Sending a New Text Message
more information.
Note: The Priority Status icon on a message does not
imply that the message gets higher priority over the
other messages when it is being transmitted. It is just
an indication that can be embedded into a message
Priority Status
on
Composing
on page 106 for