Lenovo ThinkPad L560 User Manual page 81

4. Open the latches on both sides of the memory slot at the same time
module 2 . Save the removed memory module for future use.
5. Place the notched end of the new memory module toward the contact edge side of the memory slot.
Then insert the memory module
module downward until it snaps into place
the slot and cannot be moved easily.
Attention:
• Do not touch the contact edge of the memory module. Otherwise the memory module might get
damaged.
• If you install only one memory module, ensure that you install it into the slot
slot.
1 into the slot at an angle of about 20 degrees. Pivot the memory
2 . Ensure that the memory module is firmly installed in
1 , and then remove the memory
a , which is the primary
.
Chapter 6 Replacing devices
65