Lenovo ThinkPad L560 User Manual page 113

Table 2. Config menu items (continued)
Menu item
Display
Submenu item
Fn and Ctrl Key swap
Boot Display Device
Total Graphics Memory
Boot Time Extension
Value
• Disabled
• Enabled
• ThinkPad LCD
• Analog (VGA)
• Display Port
• Display on dock
• 256 MB
• 512 MB
• Disabled
• 1 second
• 2 seconds
• 3 seconds
• 5 seconds
• 10 seconds
Chapter 8
Comments
To temporarily switch the
above two options, press
Fn+Esc to enable FnLock.
The FnLock indicator is on
when FnLock is enabled.
If you select Enabled, the
Fn key works as the Ctrl
key, and the Ctrl key works
as the Fn key.
Note: Even when Enabled
is selected, you need to
press Fn to resume the
computer from sleep mode
to normal operation.
Select the display device
that is to be activated at
boot time. This selection
is effective for boot time,
password prompt, and
ThinkPad Setup.
Display Port is the Mini
DisplayPort connector on
your computer.
Display on dock is
DisplayPort, DVI, or VGA
connector on a docking
station.
Allocate the total memory
which Intel internal graphics
shares.
Note: If you select 512
MB, the maximum usable
memory might be reduced
on 32–bit operating system.
This option defines the
amount of time to extend
the boot process, in
seconds.
The system cannot detect
some external monitors
during boot because they
need a few seconds to be
ready. Try this option if the
monitor being used does
not display the boot screen.
.
Advanced configuration
97