Oki lan 8100e Network User's Manual page 39

Location Comments
Printer Trap By selecting the button, the following dialogue box is
Setup . . . displayed:
In the dialogue box, the following items can be configured:
Printer Trap
Community Name
TCP#1—5
Detail . . .
OkiLAN 8100e Network User's Guide
bmp32.bmp
This community name is assigned to
outgoing printer status traps such as
off-line, paper out, etc.
Set the IP address to which a Trap
packet will be sent. You can set up to
five IP addresses.
By selecting the button, the following
dialogue box is displayed:
bmp33.bmp
In the dialogue box, the following items
can be configured:
Trap Enable
On-Line
On-Line
Paper Out
Configuration - 39
Set sending a Trap
packet, enabled or
disabled, for each
destination.
Set sending a Trap,
enabled or
disabled, when the
printer turns to
On-Line.
Set sending a Trap,
enabled or
disabled, when the
printer turns to
Off-Line.
Set sending a Trap,
enabled or
disabled, when
paper is out.