Oki lan 8100e Network User's Manual page 33

TCP/IP Tab
This allows you to configure TCP/IP related items.
bmp22.bmp
Location
Use TCP/IP
Protocol
Use DHCP/BOOTP
Use RARP
IP Address
Subnet Mask
Default Gateway
Use FTP/LPD
Banner
DNS Server . . .
To find corresponding items in WEB and TELNET, see the
equivalent in the Configurable Items and Default Values table that
starts on page 62.
Comments
Set TCP/IP protocol as enabled/disabled.
Check this item if IP address, subnet mask, default
gateway and IP addresses for DNS primary server and
secondary servers are retrieved from the DHCP or
BOOTP server. Otherwise, clear.
Check this item if IP address is retrieved from the
RARP server. Otherwise, clear.
Set the IP address of the selected network interface
card.
Set the subnet mask of the selected network interface
card.
Set the default gateway of the selected network
interface card.
Check this item if you want to add the FTP/LPD banner.
Otherwise, clear.
Set IP addresses for DNS primary and secondary
servers.
bmp23.bmp
OkiLAN 8100e Network User's Guide
Configuration - 33