Using Quick Setup - Oki lan 8100e Network User's Manual

Using Quick Setup

Quick Setup utility allows you to configure the print server easily
and simply without installing any software packages.
You can configure the following:
> Enable/disable TCP/IP, NetWare, EtherTalk, NetBEUI
protocols.
> Set IP address, Subnet Mask and Gateway for TCP/IP
manually or by using DHCP.
> Set NetWare mode and create Queue/Print Server/Printer
objects.
> Zone name and Port name for EtherTalk.
Configuration requires a PC with Windows 95/98/Me, Windows
2000 Advanced Server/Professional or Windows NT Server 4.0/
Work-station 4.0, Windows XP running TCP/IP or IPX/SPX
(NetWare).
This utility can only be used on a PC that can be connected to the
network with TCP/IP or IPX/ SPX.
This utility must be used on a PC that is located in the same
segment as the printer. To create a NetWare queue, NetWare
Client 32 or IntranetWare Client should be installed in your system.
The following explanation uses Windows 98 as an example.
1. Insert the CD-ROM provided with your printer into the
CD-ROM drive. If the Menu Installer does not start
automatically, click Start → Run → Browse. Browse to your
CD-ROM and click Install → Open → OK.
OkiLAN 8100e Network User's Guide
Configuration - 15