Front Panel; Connecting An Mhl-Compatible Device; Connecting An Ipod; Connecting A Usb Device - Pioneer VSX-90 Operating Instructions Manual

03

Connecting an iPod

This receiver has a dedicated iPod terminal that will allow you to control playback of audio content from your iPod
using the controls of this receiver.
USB cable included with the iPod
Tip
! An iPod/iPhone can be connected to the receiver. For details on supported models and versions of the respec-
tive products, see Playing an iPod on page 67 .
%
Switch the receiver into standby, and then use the iPod cable to connect your iPod to the
iPod/iPhone terminal on the front panel of this receiver.
! For the cable connection, also refer to the operating instructions for your iPod.
! When connecting an iPhone to this unit, keep the iPhone at least 20 cm (0.66 ft) away from this unit. If the
iPhone is kept closer to this unit and a telephone call is received by the iPhone, noise may be output from this
device.
! iPod recharging occurs whenever an iPod is connected to this unit. (Recharging is enabled only when the
unit's power is turned on.)
! For instructions on playing the iPod, see Playing an iPod

Connecting a USB device

It is possible to play audio and photo files by connecting USB devices to this receiver.
%
Switch the receiver into standby then connect your USB device to the USB terminal on the
front panel of this receiver.
! This receiver does not support a USB hub.
! For instructions on playing the USB device, see
5V 1 A HDMI 5 INPUT
iPod/iPhone
on page 67 .
5V 1 A
HDMI 5 INPUT
USB mass
storage device
Playing a USB device on page 68 .
Connecting your equipment (In case of VSX-90)

Connecting an MHL-compatible device

An MHL-compatible mobile device can be connected to enjoy 3D/Full-HD videos, high quality multi-channel
audio, and photos etc., with charge the battery on the receiver. Use the MHL cable to connect the device.
HDMI OUT
2 1
HDZONE/MAIN MAIN
ARC CONTROL
SELECTABLE
HDMI OUT 1 HDMI IN
ASSIGNABLE 1 6 -
2 1 1 2 3 4 6
BD /MHL
HDZONE/MAIN MAIN (DVD) (SAT/CBL) (OUTPUT 5 V
SELECTABLE ARC CONTROL 0.9 A MAX)
% Switch the receiver into standby then use the MHL cable to connect your MHL enabled
device to the MHL terminal on the rear panel of this receiver.
! To automatically switch to the MHL input when an MHL-compatible device is connected, see
page 112 .
! The MHL-compatible device is recharged whenever it is connected to this unit. (Recharging is enabled only
when the unit's power is turned on.)
! For instructions on playing the MHL-compatible device, see
! Do not place the MHL device on this unit which has the power turned on.
Connecting an HDMI-equipped component to the front panel
input
36
HDMI IN
1 6 -
ASSIGNABLE
1 BD 2 3 4 6 /MHL
( OUTPUT 5 V
( DVD ) ( SAT/CBL )
0.9 A MAX )
MHL cable
MHL enabled
device
MHL Setup
Playing an MHL-compatible device on
5V 1 A
HDMI 5 INPUT
Video camera (etc.)
on
page 69 .