Daikin VAM 150FAVE Service Manual page 68

SiE71-202
1.1.4 Field Setting
The following
shows the
procedure for field
setting using
remote controller of
new heat recovery
ventilation unit.
List of field setting mode Nos.
Centralized control group No. setting
General setting
Centralized control group No. setting (group)
Error record display
Sensor data
Forced fan ON
Individual setting
Unit No. reallocation
In group control, use
Supplementary Explanation
Step 1 To field setting mode
Step 2 Mode No. selection 1
Step 3 Mode No. selection 2
Step 4 Switch No. selection
Step 5 Position selection
Step 6 Position enter
Step 7 To normal mode
to select unit No.
Press for more than 4 sec.
→
[Mode (00-30)] [Mode (40-49)]
(Press for more than 4 sec.) (Press
sec. )
↔
Mode No.: UP
( ) Switch No. selection
( ) Position selection
Enters currently selected position.
Exits field setting mode and enters normal mode.
Supplementary Explanation
(HL044)
00
10-29
30
40
41
43
44
45
→
[Mode (50-59)]
for more than 4
Mode No.: DOWN
59