Last Number Redial - Panasonic KX-TDA15 Features Manual

1.6 Memory Dialling Features
1.6.1.3

Last Number Redial

Description
Every extension automatically saves recently dialled external telephone numbers to allow the same number
to be dialled again easily.
Automatic Redial:
If Last Number Redial is performed in hands-free mode and the called party is busy, redialling will be
automatically retried a preprogrammed number of times at preprogrammed intervals. The Redial Call No-
answer Ring Duration time is programmable.
This feature is available only on certain PT models which have the SP-PHONE button.
Outgoing Call Log:
Information on outgoing trunk calls is automatically logged at each extension. Users of display PTs can view
details of a preset number of recently dialled telephone numbers, and easily call the same outside party
again.
Conditions
• If a new number is dialled when the Outgoing Call Log is full and/or Automatic Redial contains a
number, the data of the oldest stored call will be deleted, and the new number will be stored.
• If any dialling operations are performed or an incoming call is answered during Automatic Redial,
Automatic Redial is cancelled.
• Automatic Redial using an analogue trunk may not be available depending on:
– the busy tone pattern.
– the IP network environment when using a KX-NT136 with G.729 CODEC. (When using IP-PTs
apart from the KX-NT136, Automatic Redial using an analogue trunk is not available.)
• Interrupt Redial
When an outside party or seized trunk is busy, a user can attempt to redial the number by pressing the
REDIAL button without going on-hook. This can be performed several times without having to go on-
hook.
• Outgoing Call Log Display by REDIAL Button
Pressing the REDIAL button on a display PT while on-hook can display the Outgoing Call Log. System
programming is required for this operation.
• If the Outgoing Call Log is used to redial an outside party, or a number already stored in the Outgoing
Call Log is manually redialled again, the number will be stored in the call log multiple times. However,
calls made using the REDIAL button are not stored in the Outgoing Call Log again.
• It is possible to change the number of records that can be stored at each extension through system
programming.
Programming Manual References
PC Programming Manual
3.8.4 [2-3] Timers & Counters—Dial / IRNA / Recall / Tone
→ Automatic Redial—Repeat Counter
→ Automatic Redial—Repeat Interval
→ Automatic Redial—Redial Call Ring Duration
→ Automatic Redial—Analogue CO Mute / Busy Detection Timer
3.8.8 [2-6-1] Numbering Plan—Main—Features—Redial
106 Feature Guide