Rear Enclosure Installation - JBL SCL-3 Owner's And Installer's Manual

REAR ENCLOSURE INSTALLATION

WARNINGS:
DO NOT exceed maximum forward position indicated on L-Brackets (Figure 9).
Supplied Security Plates Must Be Installed For All In-Ceiling Installations
For safety reasons, when retrofitting the new SCL-4 system into existing IN-CEILING installations, make sure to use the
security plates supplied with the SCL-4 system.
Be sure to decide the correct orientation of your back box (Important Note on next page) before cutting into your wall
or installing your Pre-Construction bracket!
INSTALLATION STEPS:
1. Install wall bracket with included instructions (pre-construction brackets sold separately).
2. Remove wood panel shipping insert and metal cross brace where applicable. (Figure 10 and 11)
SCL-4 Pre-Construction Bracket
Figure 10
Figure 9
or SCL-3 Pre-Construction Bracket
Figure 11
7
www.jbl.com