Rear Panel - JBL LSR4328P Owner's Manual

16
Reference - Rear Panel
il.
+/ - -
T hese increment/decrement buttons have different functions, depending upon
whether a front panel button is flashing or not. If a front panel button is flashing, they are
used to increment or decrement the value of the selected parameter. (For example, if the
PRESET button is flashing, the +/- buttons step through the various eqltalization presets.)
If no front panel button is flashing, the +/- buttons adjust the overall system volume.
(Press the
+
button to increase system volume and the - button to decrease system
volume.)
In addition, by pressing both the
+
and - buttons at the same time, they can be used to alter
the brightness of all front panel buttons and the Meter Display. There are six settings; at
the lowest setting, all buttons and meter segments are completely off, and only the JBL
logo glows to indicate power.
Rear Panel
LSR4328PI LSR4326P Rear Panel
I. Input Sensitivity switch - In the OUT positi on, selects -1 0 dBY sensitivity for the ana log
input. In the IN position (pre 'sed in), selects +4 dBu sens itivity for the ana log input.
2. Analog XLR Balanced input connector. Connect analog audio input signal here .
3. Analog
W'
Balanced input connector. Alternatively, analog audio input signal can be
connected here. C AUTION: Use either the
W'
or the XLR input, Do not
con nect sources to both a nalog inputs sim ultaneously.
.. Positive voltage to Pin 2 of the XLR connector or the tip of the
W'
jack will produce a
forward motion in the speaker cone. See Appendix C in this manual for wiring diagrams.