Oki c5550 Maintenance Manual page 281

Error Message
K Drum Life
Replace K Drum
Y Drum Life
Replace Y Drum
M Drum Life
Replace M Drum
C Drum Life
Replace C Drum
Fuser Unit Life
Replace Fuser
Belt Unit Life
Replace Belt
10053
Check The Printer
10976
Check The Printer
10975
Check The Printer
10050
Check The Printer
10054
Check The Printer
10051
Check The Printer
10052
Check The Printer
10944
Check The Printer
10945
Check The Printer
10946
Check The Printer
10947
Check The Printer
MP Tray Empty
Load Paper in MP Tray
Tray1 Empty
Load Paper in Tray1
40994
Check The Printer
44158801TH Rev.2
If a drum life error occurs and a user opens/closes the
cover or reboots the printer, this phenomenon happens.
When the printer printed 500 pages, the error occurs
again.
If a fuser life error occurs and a user opens/closes the
cover or reboots the printer, this phenomenon happens.
When the printer printed 500 pages, the error occurs again.
If a belt life error occurs and a user opens/closes the cover
or reboots the printer, this phenomenon happens. When the
printer printed 500 pages, the error occurs again.
Belt Reflex Check error. This is not a user-level error.
(If it happens, change the mode to Shipping mode. See
the Maintenance Manual.)
This is not a user-level error.
(If it happens, change the mode to Shipping mode. See
the Maintenance Manual.)
This is not a user-level error.
(If it happens, change the mode to Shipping mode. See
the Maintenance Manual.)
Registration error. This is not a user-level error.
(If it happens, change the mode to Shipping mode. See
the Maintenance Manual.)
Sensor calibration error. This is not a user-level error.
(If it happens, change the mode to Shipping mode. See
the Maintenance Manual.)
Gamma error. This is not a user-level error.
(If it happens, change the mode to Shipping mode. See
the Maintenance Manual.)
Registration sensor error. This is not a user-level error.
(If it happens, change the mode to Shipping mode. See
the Maintenance Manual.)
Adjusting data of LED HEAD is not written in PU FLASH
(only when VE LED Head without EEPROM is used)
MP tray, or tray1 is empty.
Treated as Warning until printing to the empty tray is des-
ignated. "MP Tray Empty" is displayed when paper feed
from MP tray is attempted, but the tray is empty. When
printing of the job is completed, this warning disappears if
a user opens/closes the cover or reboots the printer.
The data of COPY is memory-full.
Oki Data CONFIDENTIAL
Meaning
281 /