Ir Library Default Key Assignment; Ir Library Test - Nuvo Grand Concerto NV-I8GMS Installation Manual

2.4 IR Library Default Key Assignment

Once the desired codes are added, assign them to the
appropriate key on the Display Pad. To do this, right-click on
each code and select "Keys. " This opens a drop-down menu
of the possible key selections for the Grand Concerto
Display Pad. Select the appropriate key for that command
and the Configurator will add it to the Default Key field for
that command. Keep in mind that the Grand Concerto Control
Pad has only five IR assignable buttons, so button control is
limited. More capability for control can be incorporated in
the macro tab covered later, and can then be added to the
menu capability of that source.
Once this sequence is completed, proceed to the next
function command, and repeat the above steps. When you
have assigned a default key for each IR, click on "Done" and
that component's IR Library is complete.
2.4 Library Default Key Assignment

2.5 IR Library Test

An important feature of the Grand Concerto Configurator is
the ability to test each IR code as it is added to the IR
Library. This insures that every code will work reliably.
When a new code is added, while it is still highlighted, click
on the test button. This will open the IR Library Test window.
Make sure that the IR Learning Interface box's IR emitter is
either facing the IR receiver window of the source
equipment or an IR emitter is plugged into one of the two IR
emitter outputs and affixed to the IR receiver window of the
source equipment. Clicking on the test button will cause the
IR Learning interface to emit the code. The source
equipment should respond appropriately to the command if
it has been stored correctly. A test result box will open
where you can record yes or no to the test. Three successful
test results are required before the "Passed" count turns
green. Clicking the "OK" button will save the results in the
IR Library. The "Tested" column for that command will show
the number of successful tests performed.
Although not required, testing each code is highly
recommended.
2.5 IR Library Test
14