Pioneer AVIC-F860BT Installation Manual page 21

18 Cable tie the CAN Option harness
leads to main harness to secure
cable run.
19 USB/AUX INTERFACE
Remove the OEM Aux port, in the
armrest.
Carefully remove plastic cover by
releasing 4 clips, 1 on each side of
the casing, followed by the 1
screw that holds the PCB in place.
Insert the white
connector with cables and secure
in position with glue.
Insert the assembled PCB into the
housing, secure in place with the
screw. Apply a small amount of
superglue to each of the tabs on
the new supplied front port plate
Clip the plate into the front of the
port and allow for the glue to cure
20 Feed USB extension and AUX cable
Mike Haseler, Pioneer NV
Version 1.0 14/07/2014
Installation guide V1.0
Subaru Forester/ XV/ STI MY15
Pioneer AVIC-F860BT
plastic Molex
Pages: 21 / 28