Operation - Dolmar HT-355 Instruction Manual

Arm cord hook (Accessory)
CAUTION:
Do not attach the holder of arm cord hook to other
•
than the extension cord. Do not attach it in a
position closer to the tool beyond the hook
complete hooks. Failure to do so may cause an
accident or personal injury.
When using the arm cord hook, use the extension
•
cord as a standard equipment. Using an extension
cord available in the market may cause an
accident or injury.
Attach firmly one hook of the hook complete to the
•
tool's cord and the other hook of hook complete to
the extension cord. Working with the tool with a
sole hook only attached may cause an accident
and injury.
Using the arm cord hook helps to minimize a risk of
cutting off the extension cord unexpectedly caused by
the loose extension cord.
1
009294
Attach firmly the arm cord hook placing around your arm
and pass the extension cord through the holder. The
length of the arm cord hook band is adjustable.
NOTE:
Do not pass the extension cord through the band.
•
Do not force the opening of the holder. Failure to
•
do so may cause deflection and damage to it.
Using the arm cord hook together with the waist
•
cord hook is more helpful.

OPERATION

Refer to the Important Safety Instructions before
operation.
CAUTION:
When operating the trimmer, keep extension cord
•
behind trimmer. Never drape it over hedge being
trimmed.
Be careful not to accidentally contact a metal
•
fence or other hard objects while trimming. The
blade will break and may cause serious injury.
Overreaching with a hedge trimmer, particularly
•
from a ladder, is extremely dangerous. Do not
work from anything wobbly or infirm.
1. Holder
2
2. Arm cord hook
Do not attempt to cut branches thicker than 10 mm
•
diameter with this trimmer. These should first be
cut with shears down to the hedge trimming level.
007559
CAUTION:
Do not cut off dead trees or similar hard objects.
•
Failure to do so may damage the tool.
Hold the trimmer with both hands pull the switch trigger
A or B and move it in front of your body.
009413
When operating the hedge trimmer, keep extension cord
behind trimmer.
As a basic operation, tilt the blades towards the
trimming direction and move it calmly and slowly at the
speed rate of 3 - 4 seconds per meter.
009284
1
3
009285
To cut a hedge top evenly, it helps to tie a string at the
desired hedge height and to trim along it, using it as a
7
1. Trimming
direction
2. Tilt the blades
3. Hedge surface
to be trimmed
2