Panasonic WV-SF448 Operating Instructions Manual page 26

2 Monitor images on a cellular phone/mobile terminal
Functions
A Pan/tilt
*2 *3
B Zooming control
C Refresh control
D Resolution control
E Home position
F Preset
*2 *3
G AUX control
H Privacy Mode
26 Operating Instructions
The display position of camera images can be controlled by panning and
tilting. The camera will pan or tilt to each direction by pressing the
corresponding dial key.
It is possible to perform zooming operations of the camera by pressing "*" or
*2 *3
"#".
Press the dial key "5" or the [Manual Refresh] button to refresh the camera
images.
Press the [Auto Refresh] button to refresh the images from the camera in
5-second intervals.
When the dial key "5" or the [Manual Refresh] button is pressed again, the
refresh mode of the camera will return to manual refresh.
IMPORTANT
•
Transmission will be periodically performed when "Auto Refresh" is
selected for the camera image. Confirm the contract plan of the
cellular phone in use before using this function.
•
Depending on the cellular phone in use, "Auto Refresh" may be
unavailable.
Changes the image capture size by pressing the dial key "0".
Note
•
Some cellular phones cannot change the image capture size even
when resolution is changed by resolution control.
The image from the camera can be moved to the home position.
*2 *3
The camera will move to the designated preset position to display images by
pressing the dial key corresponding to the desired channel. (The dial key
numbers are not displayed for Preset No 5 or greater. Only preset IDs will be
displayed for them.) (®page 113)
Note
•
A maximum of 8 designated presets can be operated.
Controls the AUX terminal.
*2
These buttons will be displayed only when "AUX output" is selected for
"Terminal 3" on the setup menu. (®page 129)
Select "Privacy Mode" to activate Privacy mode.
I
Outline of functions