Configure The Settings Relating To Http Alarm Notification [Notification] - Panasonic WV-SF448 Operating Instructions Manual

13.10 Configure the settings relating to HTTP alarm
notification [Notification]
Click the [Notification] tab on the "Alarm" page. (®page 55, page 57)
The settings relating to HTTP alarm notification can be configured in this section.
HTTP alarm notification
[Address 1] - [Address 5]
Enter the destination IP address or host name of the HTTP alarm notification. Up to 5 destination server
addresses can be registered.
•
Available characters: Alphanumeric characters, the colon (:), the period (.), the underscore (_), and the
hyphen (-).
•
Default: http://
Example of entry: "http://IP address of the camera + : (colon) + port number" or "http://Host name: (colon) +
port number"
[Alarm] checkbox
When the checkbox is checked, the HTTP alarm notification will be provided upon an alarm occurrence.
[Delete] button
When this button is clicked, all configured information, including the address, user name, password, and
notification data, will be deleted.
[User name]
Enter the user name (login name) to access the HTTP server.
•
Available number of characters: 0 - 63 characters
•
Unavailable characters: " & : ; \
13 Configure the alarm settings [Alarm]
Operating Instructions 145