Base
Base
2
3
•
Insert the phone cable into the right-hand connection socket
it clicks into place.
•
Insert the power cable from the power adapter into the connection socket on the left
•
Push both cables into the appropriate cable channels
•
Place the cover in the notches on the back of the base
•
Connect the power
•
Connect the phone
The network cable must always be connected in order to function, as the phone will
not operate without a power supply.
6
5
1
adapter
4
5
jack
3a
4
3
.
3a
(not if mounting on the wall).
1
at the rear of the base until
.
2