Gigaset SCULPTURE CL750 Manual page 45

SMS service centres
The number for at least one SMS service centre must be saved in the device to be able to send
SMS messages. The SMS service centre number can be obtained from the service provider.
SMS messages are received from every entered SMS service centre as long as they are registered
with their service provider.
Your SMS messages are sent via the SMS service centre that is entered as the active send centre.
However, you can activate any other SMS service centre as the active send service centre to send
a current message.
Entering/changing the SMS service centre, setting the send service centre
¤
. . . use
OK . . . use
then
Activate send service centre:
Enter the number of the SMS service:
Save settings:
If you have agreed a flat fixed line network rate, the chargeable numbers with dialling
code 0900 are often blocked. If, in this case, a 0900 number is entered for the SMS
service centre, you will not be able to send text messages from your phone.If the
attempt to send fails, the SMS is saved in the incoming messages list and indicated as
failed.
SMS to PABXs
•
The Call Line Identification must be forwarded to the extension of the PABX (CLIP).
•
If necessary, the access code/outside line code must be prefixed to the number of the SMS
service centre (depending on your PABX). To test: Send an SMS to your own number, once
with the access code and once without.
•
If the SMS is sent without the extension number, it will not be possible for the recipient to
answer directly.
t select SMS
to select SMS service centre (
¤
Active Send: . . . use
are sent via the SMS service centre)
For the SMS service centres 2 to 4, the setting only applies to the
next SMS.
¤
SMS Service Centre Number
ber
¤
Save
OK Settings
= current send service centre)
to select Yes or No (Yes = SMS messages
SMS (text messages)
OK Service Centres
. . . use to enter the num-
Edit . . .
43