Before Startup - Kärcher BR 40/25 C Bp Manual

Before Startup

Unloading
 Release the star grips of the pushing
handle fastening.
 Turn the pushing handle backwards
and tighten the star grips.
 Place long lateral boards of the packag-
ing as a ramp next to the pallet.
 Fix the ramp on the pallet with nails.
 Place short boards as a support under-
neath the ramp.
 Remove the wooden bars in front of the
wheels.
 Push down the appliance through the
ramp from the pallet.
Safety
Please observe the following warning notes
when handling batteries:
Observe the directions on the bat-
tery, in the instructions for use and
in the vehicle operating instructions
Wear eye protection
Keep children away from acid and
batteries
Risk of explosion
Fire, sparks, naked flames and
smoking must be strictly avoided
20
Batteries
Danger of chemical burns
First aid
Warning note
Disposal
Do not throw the battery into the
regular waste
DANGER
Risk of explosion! Do not put tools or similar
on the battery, i.e. on the terminal poles
and cell connectors.
Risk of injury! Ensure that wounds never
come into contact with lead. Always clean
your hands after working on batteries.
Recommended batteries, chargers
Battery
2 units required
Battery connector
Charger
Batteries and chargers are available in spe-
cialised stores.
Maximum battery dimensions
Length
330 mm
If you use wet batteries in the Bp model,
then follow the following instructions:
– It is necessary to conform to the maxi-
mum battery dimensions.
While charging maintenance-free batter-
ies, follow the specifications of the battery
manufacturer (see maintenance chart)
Insert batteries and connect
Batteries and charger are already fitted in
the Bp Pack models.
 Empty tanks, whenever required
– 4
EN
Order number
6.654-264.0
6.650-440.0
6.682-042.0
Width Height
171 mm 235 mm