• Never attempt to make any adjustments or repairs other than those described in this manual. Take the DM2002X to your dealer or to an authorized Numark Service Center. A NOTE ON CABLES: Make the input and output connections with readily available low-capacitance stereo cables.
DM2002X DM2002X FRONT PANEL DIAGRAM... GUIDED TOUR OF FEATURES AND OPERATING INSTRUCTIONS... If the D M 2 0 0 2 X is your first mixer, please read this entire manual before you begin operation. If you are an experienced DJ we recommend reading the manual so you may fully appreciate this newer technology.
DM2002X DM2002X REAR PANEL DIAGRAM... REAR PANEL: INPUTS AND OUTPUTS 1. AC Connection. Plug your power cord in here. See safety precautions on page 3 for proper treatment of the power cord. 2. GND is the grounding lug for all turntables. Always use this connection (your turntable cable should have a grounding wire).
Page 12
To place this warranty into effect, the enclosed WARRANTY REGISTRATION CARD must be returned to Numark Industries, LLC within thirty (30) days after date of purchase. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.