DM1001X/DM1002X DM1001X/DM1002X FACE PANEL DIAGRAM... GUIDED TOUR OF FEATURES AND OPERATING INSTRUCTIONS... If this is your first mixer, please read this entire manual before you begin operation. If you are an experienced DJ we highly recommend reading the manual so you may fully appreciate this newer technology.
14. The Headphone Jack is used to connect headphones with a standard 1/4" stereo plug. DM1001X/DM1002X FRONT PANEL DIAGRAM... 1. Microphone Jack for a 1/4” Microphone connector. 2. Crossfader Curve Adjust Switch Postition- Right: The crossfader creates a short cut to bring in the opposing track to full volume prior to the mid point in the fader.
DM1001X/DM1002X DM1001X/DM1002X REAR PANEL DIAGRAM... REAR PANEL: INPUTS AND OUTPUTS 1. Power Connection. Plug your power adapter in here. See safety precautions on page 3 for proper treatment of the power cord. 2. GND is the grounding lug for all turntables. Always use this connection (your turntable cable should have a grounding wire).
To place this warranty into effect, the enclosed WARRANTY REGISTRATION CARD must be returned to Numark Industries, LLC within thirty (30) days after date of purchase. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.