Install The Ink Cartridges - Brother MFC-J285DW Quick Setup Manual

Hide thumbs Also See for MFC-J285DW:
Table of Contents

Advertisement

d
Lift the scanner cover to release the lock a.
Gently push the scanner cover support
down b and close the scanner cover c using
both hands.
CAUTION
Be careful not to pinch your fingers when the
scanner cover closes.
NOTE
If you are sharing one telephone line with an
external telephone, connect it as shown below.
Before you connect the external telephone,
remove the white protective cap c from the EXT.
jack on the machine.
a Extension telephone
b External telephone
c Protective cap
1
3
3
2
1
2
3
NOTE
If you are sharing one telephone line with an
external telephone answering machine, connect it
as shown below.
Before you connect the external telephone
answering machine, remove the white protective
cap a from the EXT. jack on the machine.
a Protective cap
Set the receive mode to External TAD if you
have an external answering machine. See
Choose the correct Receive Mode on page 8. For
additional details, see Connecting an external
TAD (telephone answering device) in chapter 6 of
the Basic User's Guide.
3

Install the ink cartridges

CAUTION
If ink gets in your eyes, wash it out with water at
once and call a doctor if you are concerned.
NOTE
Make sure you install the Starter Ink Cartridges
included with your machine first.
1
3

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents