Panasonic KX-TDA50 Feature Manual page 309

Access Code Type
Host PBX Access
Code
Special Carrier
Access Code
• ARS
If ARS is applied to a dialed number, TRS will check the user-dialed number, not the modified number
produced by ARS. You do not need to program ARS-modified numbers in any of the TRS Tables.
Additionally, when using ARS, TRS will ignore the Host PBX Access code or Special Carrier Access
code.
• Dialing Digit Restriction during Conversation
TRS can also limit the number of digits which may be dialed by an extension user while the user is
engaged on a received CO line call. If the number of dialed digits exceeds the limit, the line will be
disconnected.
→ 2.13.5 [7-5] Miscellaneous—Dial Digits Limitation After Answering—Dial Digits
• It is possible to select through system programming whether the CO line is disconnected when the
Inter-digit time expires without the TRS check being completed.
→ 2.13.5 [7-5] Miscellaneous—Mode when Dial Time-out before TRS Check
– If no disconnection is chosen, the TRS check will also be performed after the Inter-digit time
expires.
– If disconnection is chosen, the line will be disconnected when the CO line Inter-digit time expires.
This also prevents EFA from being used.
This setting applies to all CO lines.
• When one of the following features is used, the TRS level of the extension can be temporarily changed.
If two or more of these features are used simultaneously (Dial Tone Transfer is used while the extension
is locked, for example), the TRS level of the feature with the highest priority is applied for the duration
of the call. The numbers below (1 through 4) indicate the priority of each feature, with 1 having the
highest priority, and 4 having the lowest.
1)
Dial Tone Transfer (→ 1.4.4 Dial Tone Transfer)
2)
TRS Override by System Speed Dialing
Verification Code Entry/Walking COS (→ 1.19.1 Verification Code Entry, → 1.20.1 Walking COS)
3)
4)
Extension Dial Lock (→ 1.5.4 Extension Dial Lock)
Programming References
PC Programming Manual
2.8.11 [2-7-1] Class of Service—COS Settings—TRS
→ TRS Level—Day, Lunch, Break, Night
→ TRS Level for System Speed Dialing
2.10.1 [4-1-1] Wired Extension—Extension Settings—Main—COS
2.10.5 [4-1-4] Wired Extension—Flexible Button
→ Type
Access Code is stored in the PBX
Access Code is dialed
TRS ignores the code
and checks the
remaining digits.
TRS ignores the code
and checks the
remaining digits.
Access Code is not
dialed
Number dialed is not a
CO line call, so TRS
does not check the
number.
TRS checks the entire
number.
1.17 T
Access Code is not
stored in the PBX
TRS checks the entire
number.
TRS checks the entire
number.
Feature Manual 309